DR-E03 (Photocontrol) Parameters
Sensor Type	Photodiode
Rated Voltage	110V~240V AC
Wide Input Voltage Range	100V~277Vac
Working Mode	<10~20 Lux / ON , >30~60Lux / OFF,Time-delay: 2 Seconds
Load Current	15A (220Vac)
Ambient Temp	-40℃~105℃
Size	φ80.5mm * φ51.6mm(Height)
Case Material	UV resistant PC
Shell Design	It Conforms to American National Standard ANSI C136.41-2013
Safety Certification	E510435,Vol 1 , Contact Us For More Informations
Life Span	Quality Assurance for 3 Years
Applications	Street /Roadway Lighting, Photocontrol Lighting, Parking Lot Lighting, Garden Lighting, Smart City, Smart Street Light, 5G, Smart Pole

What are NEMA photocell receptacles

On the top of most street lights or parking lot lights is a blue or black round knob that is actually used as a

lighting control device. The most common lighting control is a dusk to dawn or photocell device. The receptacle

can be used for dusk to dawn sensors, but also for advanced DALI / Bluetooth controls. The 3, 5 and 7 pin standard

are set by NEMA and are standard in the lighting industry across all manufacturers. They are all the same 3 pin twist

lock system so they are easily swapped out. The 5 pin and 7 pin add some additional features.

If you have an outdoor lighting fixture with a receptacle but want to turn it on or off with a switch or

use another control instead of the photocell, there is an easy fix. The sensor can easily be swapped

with a shorting cap or bypass cap outfitted with the same 3 prongs to bypass the sensor.

Packing & Delivery

Inquiry Cart 0